Notes : Motion : JKBOSE Class 9 Science – Chapter 1

1. Introduction

  • Motion means a change in the position of an object with time.
  • Everyday motion: birds flying, blood flowing, cars moving. Atoms, planets and galaxies are also in motion.
  • Some motion is known only through indirect evidence, e.g. moving dust and leaves show that air is moving.
  • Motion is relative. For a passenger in a moving bus, roadside trees appear to move backwards. A person on the road sees the bus and its passengers moving. Another passenger inside sees fellow passengers at rest.
  • Types of motion: straight line, circular, rotational, vibrational, or a combination.

2. Describing Motion

  • The location of an object is described using a reference point (called the origin).
  • Example: a school is 2 km north of the railway station. The railway station is the reference point.

2.1 Motion along a straight line

An object starts from O, goes to A (60 km), then returns through B to C.

Term Meaning
Distance Total path length covered. Scalar. Only magnitude, never negative.
Displacement Shortest distance from the initial to the final position, in a straight line with direction. Vector. Can be zero, positive or negative.

Example: O to A is 60 km, then A to C is 35 km. Distance = 60 + 35 = 95 km. Displacement = OC = 25 km.

Key points

  • Magnitude of displacement is equal to distance only for straight-line motion in one direction.
  • Magnitude of displacement is never greater than the distance.
  • Displacement can be zero even when distance is not zero. If the object returns to the start, displacement = 0 but distance = 120 km (60 + 60).
  • SI unit of both: metre (m).

2.2 Uniform and non-uniform motion

  • Uniform motion: equal distances in equal intervals of time (e.g. 5 m every second). The time interval should be small.
  • Non-uniform motion: unequal distances in equal intervals of time (e.g. a car on a crowded street, a person jogging in a park).

3. Measuring the Rate of Motion

3.1 Speed

  • Speed is the distance travelled per unit time. It is a scalar.
  • Formula: v = s / t (1.1)
  • SI unit: m s⁻¹. Other units: cm s⁻¹, km h⁻¹.
  • Average speed = Total distance travelled / Total time taken
  • Conversion: 1 km/h = 5/18 m/s, so 36 km/h = 10 m/s.

3.2 Velocity (speed with direction)

  • Velocity is the speed of an object in a definite direction. It is a vector.
  • Velocity changes if speed, direction or both change.
  • Average velocity = Total displacement / Total time taken
  • If velocity changes at a uniform rate: v_av = (u + v) / 2 (1.2)
    • u = initial velocity, v = final velocity.
  • Units of speed and velocity are the same (m s⁻¹).
Speed Velocity
Scalar

Vector

Distance / time

Displacement / time

Always positive Can be positive, negative or zero
Average speed is never zero for a moving body Average velocity can be zero

4. Rate of Change of Velocity: Acceleration

  • Acceleration is the change in velocity per unit time.
  • Formula: a = (v – u) / t
  • SI unit: m s⁻².
  • Positive acceleration: in the direction of velocity (speeding up).
  • Negative acceleration (retardation / deceleration): opposite to the direction of velocity (slowing down).
  • Uniform acceleration: velocity changes by equal amounts in equal intervals of time. Example: a freely falling body.
  • Non-uniform acceleration: velocity changes by unequal amounts in equal intervals of time. Example: a car increasing its speed by unequal amounts.

5. Graphical Representation of Motion

5.1 Distance–time graphs

  • Time on the x-axis, distance on the y-axis.
  • Uniform speed: a straight line sloping upward. Distance is directly proportional to time.
  • Non-uniform speed: a curved (non-linear) graph.
  • Object at rest: a straight line parallel to the time axis.
  • Slope of the graph = speed: v = (s₂ – s₁) / (t₂ – t₁)
  • A steeper line means a greater speed.

.

5.2 Velocity–time graphs

  • Time on the x-axis, velocity on the y-axis.
  • Uniform velocity: a straight line parallel to the time axis.
  • Uniform acceleration: a straight line sloping upward (or downward for retardation).
  • Non-uniform acceleration: a curve of any shape.
  • Slope of the v–t graph = acceleration.
  • Area under the v–t graph = distance (magnitude of displacement).
    • Uniform velocity: area of the rectangle = velocity × time.
    • Uniform acceleration: area of rectangle + area of triangle = u × t + ½ × t × (at).

6. Equations of Motion (for uniform acceleration)

Equation Relation

v = u + at

velocity–time

s = ut + ½at²

position–time

2as = v² – u²

position–velocity

Here u is the initial velocity, v the final velocity, a the acceleration, t the time and s the distance.

Sign conventions: take the direction of motion as positive. Retardation is negative. For a body starting from rest, u = 0. For a body that comes to rest, v = 0. For a freely falling body, a = g = 10 m s⁻² (about 9.8).

6.1 Derivations by the graphical method

Consider a velocity–time graph with a point A (velocity u at t = 0) and a point B (velocity v at time t). OC = t, OA = u, BC = v.

(i) v = u + at

  • BD = BC – CD = v – u (since CD = OA = u).
  • Acceleration a = BD / AD = BD / t, so BD = at.
  • Therefore v – u = at, or v = u + at.

(ii) s = ut + ½at²

  • Distance s = area of OABC = area of rectangle OADC + area of triangle ABD.
  • s = OA × OC + ½ × AD × BD = u × t + ½ × t × at.
  • So s = ut + ½at².

(iii) 2as = v² – u²

  • s = area of trapezium OABC = ½ (OA + BC) × OC = ½ (u + v) t.
  • From (i), t = (v – u) / a.
  • s = (u + v)(v – u) / 2a, so 2as = v² – u².

7. Uniform Circular Motion

  • When velocity changes in magnitude or direction or both, the object is accelerating.
  • In circular motion with constant speed, only the direction keeps changing, so it is accelerated motion.
  • As a track goes from rectangle to hexagon to octagon and so on, it approaches a circle.
  • Speed in circular motion: v = 2πr / t , where r is the radius and t the time for one revolution.
  • Uniform circular motion: an object moving along a circular path with uniform speed.
  • Direction of velocity at any point is along the tangent to the circle. A released stone, hammer or discus flies off in a straight line tangent to the circle.
  • Examples: the moon around the earth, a satellite in a circular orbit, a cyclist on a circular track at constant speed.

8. What You Have Learnt (Summary)

  • Motion is a change of position, described by distance or displacement.
  • Motion can be uniform or non-uniform.
  • Speed = distance / time. Velocity = displacement / time.
  • Acceleration = change in velocity / time.
  • Graphs show uniform and non-uniform motion. Slope of s–t = speed; slope of v–t = acceleration; area under v–t = distance.
  • Equations of motion: v = u + at, s = ut + ½at², 2as = v² – u².
  • Uniform circular motion = circular path with uniform speed.

9. Quick Revision: Formulas

Quantity Formula.           SI unit.
Speed s / t

m s⁻¹

Average speed Total distance / Total time

m s⁻¹

Average velocity Displacement / Total time, or (u + v) / 2

m s⁻¹

Acceleration (v – u) / t

m s⁻²

1st equation v = u + at
2nd equation s = ut + ½at²
3rd equation 2as = v² – u²
Circular speed 2πr / t

m s⁻¹

Solutions to All Numericals and Questions in the Chapter

A. Solved Examples (from the chapter)

Example 1.1: An object travels 16 m in 4 s and another 16 m in 2 s. Find the average speed.

  • Total distance = 16 + 16 = 32 m. Total time = 4 + 2 = 6 s.
  • Average speed = 32 / 6 = 5.33 m s⁻¹.

Example 1.2: The odometer reads 2000 km at the start and 2400 km at the end of an 8 h trip. Find the average speed in km h⁻¹ and m s⁻¹.

  • s = 2400 – 2000 = 400 km, t = 8 h.
  • v_av = 400 / 8 = 50 km h⁻¹.
  • 50 × 1000 / 3600 = 13.9 m s⁻¹.

Example 1.3: Usha swims 180 m (to and fro in a 90 m pool) in 1 minute. Find the average speed and average velocity.

  • Distance = 180 m, displacement = 0 m, time = 60 s.
  • Average speed = 180 / 60 = 3 m s⁻¹.
  • Average velocity = 0 / 60 = 0 m s⁻¹.

Example 1.4: Rahul’s bicycle goes from rest to 6 m s⁻¹ in 30 s, then slows to 4 m s⁻¹ in 5 s.

  • Case 1: u = 0, v = 6, t = 30. a = (6 – 0) / 30 = 0.2 m s⁻².
  • Case 2: u = 6, v = 4, t = 5. a = (4 – 6) / 5 = –0.4 m s⁻².

Example 1.5: A train starts from rest and reaches 72 km h⁻¹ in 5 minutes. Find (i) the acceleration and (ii) the distance.

  • u = 0, v = 72 km h⁻¹ = 20 m s⁻¹, t = 5 min = 300 s.
  • (i) a = (v – u) / t = 20 / 300 = 1/15 m s⁻² (≈ 0.067 m s⁻²).
  • (ii) 2as = v² – u², so s = v² / 2a = 400 / (2 × 1/15) = 3000 m = 3 km.

Example 1.6: A car accelerates uniformly from 18 km h⁻¹ to 36 km h⁻¹ in 5 s.

  • u = 18 km h⁻¹ = 5 m s⁻¹, v = 36 km h⁻¹ = 10 m s⁻¹, t = 5 s.
  • (i) a = (10 – 5) / 5 = 1 m s⁻².
  • (ii) s = ut + ½at² = 5 × 5 + ½ × 1 × 25 = 25 + 12.5 = 37.5 m.

Example 1.7: Brakes give a = –6 m s⁻²; the car stops in 2 s. Find the distance.

  • a = –6 m s⁻², t = 2 s, v = 0.
  • v = u + at gives 0 = u – 12, so u = 12 m s⁻¹.
  • s = ut + ½at² = 12 × 2 + ½ × (–6) × 4 = 24 – 12 = 12 m.

B. In-text Questions

Questions after Section 1.1 (Distance and displacement)

Q1. Can an object that has moved through a distance have zero displacement?

Yes. If the object returns to its starting point, the displacement is zero but the distance is not. Example: a person walks 60 m east and then 60 m back west. Distance = 120 m, displacement = 0.

Q2. A farmer moves along the boundary of a square field of side 10 m in 40 s. What is the magnitude of displacement at the end of 2 min 20 s?

  • Perimeter = 4 × 10 = 40 m, covered in 40 s, so one round takes 40 s.
  • Time = 2 min 20 s = 140 s, so number of rounds = 140 / 40 = 3.5.
  • After 3 full rounds he is back at the start. The extra half round (20 s) takes him to the diagonally opposite corner.
  • Displacement = diagonal = √(10² + 10²) = 10√2 ≈ 14.1 m.

Q3. Which of the following is true for displacement? (a) It cannot be zero. (b) Its magnitude is greater than the distance.

Neither is true. Displacement can be zero, and its magnitude is never greater than the distance travelled.

Questions after Section 1.2 (Speed and velocity)

Q1. Distinguish between speed and velocity.

Speed is distance per unit time. It is a scalar with magnitude only. Velocity is displacement per unit time. It is a vector with both magnitude and direction.

Q2. Under what condition(s) is the magnitude of average velocity equal to the average speed?

When the object moves along a straight line in one direction only, so that displacement equals distance.

Q3. What does the odometer of an automobile measure?

The distance travelled by the vehicle.

Q4. What does the path of an object look like in uniform motion?

A straight line, covering equal distances in equal intervals of time. Its distance–time graph is a straight line.

Q5. A signal from a spaceship reached the ground station in 5 minutes. Find the distance (speed of light = 3 × 10⁸ m s⁻¹).

  • t = 5 min = 300 s, v = 3 × 10⁸ m s⁻¹.
  • Distance = v × t = 3 × 10⁸ × 300 = 9 × 10¹⁰ m.

Questions after Section 1.3 (Acceleration)

Q1. When will you say a body is in (i) uniform acceleration (ii) non-uniform acceleration?

(i) Uniform: velocity changes by equal amounts in equal intervals of time, however small. (ii) Non-uniform: velocity changes by unequal amounts in equal intervals of time.

Q2. A bus decreases its speed from 80 km h⁻¹ to 60 km h⁻¹ in 5 s. Find the acceleration.

  • u = 80 km h⁻¹ = 80 × 5/18 = 22.22 m s⁻¹.
  • v = 60 km h⁻¹ = 60 × 5/18 = 16.67 m s⁻¹.
  • a = (v – u) / t = (16.67 – 22.22) / 5 = –1.11 m s⁻².
  • The negative sign shows retardation.

Q3. A train starting from a station with uniform acceleration attains 40 km h⁻¹ in 10 minutes. Find its acceleration.

  • u = 0, v = 40 km h⁻¹ = 40 × 5/18 = 11.11 m s⁻¹, t = 10 min = 600 s.
  • a = (11.11 – 0) / 600 = 0.0185 m s⁻² (≈ 1.85 × 10⁻² m s⁻²).

Questions after Section 1.4 (Graphs)

Q1. What is the nature of the distance–time graph for uniform and non-uniform motion?

Uniform motion gives a straight line inclined to the time axis. Non-uniform motion gives a curved line.

Q2. What can you say about an object whose distance–time graph is a straight line parallel to the time axis?

The distance does not change with time, so the object is at rest (speed = 0).

Q3. What can you say about an object whose speed–time graph is a straight line parallel to the time axis?

It is moving with constant (uniform) speed, so its acceleration is zero.

Q4. What does the area under the velocity–time graph measure?

The distance travelled (magnitude of displacement) by the object.

Questions after Section 1.5 (Equations of motion)

Q1. A bus starting from rest moves with uniform acceleration of 0.1 m s⁻² for 2 minutes. Find (a) the speed acquired, (b) the distance travelled.

  • u = 0, a = 0.1 m s⁻², t = 2 min = 120 s.
  • (a) v = u + at = 0 + 0.1 × 120 = 12 m s⁻¹.
  • (b) s = ut + ½at² = 0 + ½ × 0.1 × (120)² = 0.05 × 14400 = 720 m.

Q2. A train at 90 km h⁻¹ is braked with uniform acceleration of –0.5 m s⁻². How far does it go before stopping?

  • u = 90 km h⁻¹ = 25 m s⁻¹, v = 0, a = –0.5 m s⁻².
  • 2as = v² – u², so s = (0 – 625) / (2 × –0.5) = 625 m.

Q3. A trolley on an inclined plane has acceleration 2 cm s⁻². What is its velocity 3 s after the start?

  • u = 0, a = 2 cm s⁻², t = 3 s.
  • v = u + at = 0 + 2 × 3 = 6 cm s⁻¹ (0.06 m s⁻¹).

Q4. A racing car has a uniform acceleration of 4 m s⁻². What distance does it cover in 10 s after start?

  • u = 0, a = 4 m s⁻², t = 10 s.
  • s = ut + ½at² = ½ × 4 × 100 = 200 m.

Q5. A stone is thrown vertically upward at 5 m s⁻¹. Acceleration is 10 m s⁻² downward. Find the height attained and the time to reach there.

  • u = 5 m s⁻¹, a = –10 m s⁻², v = 0 at the top.
  • Height: 2as = v² – u², so s = (0 – 25) / (2 × –10) = 1.25 m.
  • Time: v = u + at, so 0 = 5 – 10t, giving t = 0.5 s.

C. Activity Numericals

Activity 1.3 (basketball court): Walking along two adjacent sides (about 28 m + 15 m) covers a distance of 43 m. The displacement is the diagonal, √(28² + 15²) ≈ 31.8 m. Distance is greater than the magnitude of displacement.

Activity 1.4 (odometer): Distance by road = 1850 km. The straight-line distance (displacement) between Bhubaneswar and New Delhi, measured on the road map, comes to roughly 1,300 km. It is less than 1850 km. Use your own map measurement with the map scale for your answer.

Activity 1.5 (Table 1.1):

  • Object A covers 10 m in every 15 minutes: uniform motion.
  • Object B covers 12, 7, 4, 12, 2, 4, 3 m in successive intervals (unequal): non-uniform motion.

Activity 1.6 (walking): Distance = average speed × time. Example: speed 4 km h⁻¹ and time taken 15 min = 0.25 h, so distance = 4 × 0.25 = 1 km.

Activity 1.7 (lightning and thunder): Light travels much faster than sound, so you see the lightning before you hear the thunder. Distance = 346 m s⁻¹ × time gap. Example: a gap of 3 s gives 346 × 3 = 1038 m.

Activity 1.9 (Table 1.4: train A to B to C):

  • A to B: distance 120 km, time = 11:15 – 08:15 = 3 h, speed = 40 km h⁻¹.
  • Halt at B: 15 minutes (11:15 to 11:30), a horizontal line on the graph.
  • B to C: distance 60 km, time = 13:00 – 11:30 = 1.5 h, speed = 40 km h⁻¹.
  • The graph has two sloping straight lines of equal slope with a horizontal part at B. Motion is uniform between stations.

Activity 1.10 (Feroz and Sania, Table 1.5):

Interval (5 min each) Feroz (km) Speed (km h⁻¹) Sania (km) Speed (km h⁻¹)
8:00–8:05 1.0 12.0 0.8 9.6
8:05–8:10 0.9 10.8 0.8 9.6
8:10–8:15 0.9 10.8 0.7 8.4
8:15–8:20 0.8 9.6 0.7 8.4
8:20–8:25 – – 0.6 7.2
  • Average speed of Feroz = 3.6 km / 20 min = 10.8 km h⁻¹.
  • Average speed of Sania = 3.6 km / 25 min = 8.64 km h⁻¹.
  • Both have non-uniform motion (curved graphs). Feroz’s graph is steeper, so he is faster and reaches school earlier.

Table 1.2 (accelerated car): Distance values are 0, 1, 4, 9, 16, 25 and 36 m at 0, 2, 4, 6, 8, 10 and 12 s. The distance grows faster each interval, so the graph is a curve (non-uniform speed).

Table 1.3 (velocity of the car): Velocity rises by 2.5 m s⁻¹ (9 km h⁻¹) every 5 s. Acceleration = 2.5 / 5 = 0.5 m s⁻², and the v–t graph is a straight sloping line.

D. Important Points to Remember

  • Always convert units to SI before using the equations. km h⁻¹ to m s⁻¹: multiply by 5/18.
  • Use a negative sign for retardation.
  • Use s for distance in the equations only when motion is in one direction.
  • At the highest point of an upward throw, v = 0, but acceleration is still 10 m s⁻² downward.
  • Circular motion at constant speed is accelerated because the direction keeps changing.

 

Download 1 page Quick Notes PDF sheet : Download

Leave a Comment